Berlin, Germany and Logan Township, NJ – Today, Daimler Trucks is handing over the first units of its all-electric FUSO eCanter to European customers. Four renowned global logistics companies—DHL, DB Schenker, Rhenus and Dachser—will use the series-produced all-electric light-duty eCanter truck in their fleets. In the future, these FUSO eCanters will play an important part in the companies’ sustainable fleet management, especially in urban delivery transport and various other logistics tasks. With the presentation of its product brand, E-FUSO, in October this year, FUSO has already strengthened its commitment to alternative drivetrains. Over the next few years, all truck and bus models will offer one additional electric variant.
Marc Llistosella, Head of Daimler Trucks Asia, explains: “With the FUSO eCanter we are delivering the first all-electric truck in series production to our customers in Europe today. Over 90,000 kilometers of testing in everyday operating conditions secure that we handover a reliable and economical vehicle to our customers. With the FUSO eCanter our customers now operate not only quietly and without locally emitted CO2, they also save money on operating costs. This is the future of urban distribution transport."
Various areas of operation for customers
The customers are all in the logistics business, but the trucks’ areas of operation are divers. All customers are putting the vehicles to work that is usually carried out with conventional drivetrains. The customer’s decision for the FUSO eCanter was influenced by factors such as noise and emission reductions, fleet-sustainability and also by economical reasons. The drivers of the FUSO eCanter will be trained to operate the vehicle. The customers obtain their vehicles via a 24 month long-term rental from CharterWay, Daimler’s own rental and leasing expert in the commercial vehicle business.
Deutsche Post DHL will use its six vehicles in two important business divisions: Two vehicles will perform inner city delivery runs of business and private customers of DHL Freight’s Berlin branch, for heavy individual cargo, such as electrical or large household appliances. DHL Paket will use four vehicles for the delivery of goods to businesses and corporate clients. For this, the electric trucks will be fully integrated in existing business processes and will replace the vehicles with conventional drivetrains which were used so far.
DB Schenker chose the FUSO eCanter consciously. The new vehicles give DB Schenker an opportunity to test a series production electric vehicle for inner city logistics under real-life production conditions. Among other tasks, one of the three trucks will deliver and collect general cargo in the inner city of Berlin. Rhenus Group, a globally operating provider of logistics, will use the three FUSO eCanter within its home delivery unit. From the central warehouse in Hoppegarten, the all-electric trucks will deliver furniture, consumer electronics, home appliances and heavy sport equipment to the inner city of Berlin.
Two more FUSO eCanter will be driving for the transport company Dachser. Their job will be the general goods transportation core business on the last mile, meaning pallets with industrial goods either at micro-hubs or goods that are delivered directly to the customer, as well as collecting goods and delivering them to the Dachser-branches. At these branches, the eCanters will recharge overnight using a high-voltage charging station.
Customers benefit from an extensive pool of experience
After years of thorough development and testing, the FUSO eCanter is now fully integrated in the conventional FUSO Canter’s production line. In July this year, production in Tramagal, Portugal started. All eCanter for the European and the U.S. markets are produced here.
On September 14, 2017, the new FUSO eCanter was launched to the global market in New York City. It is the world’s first all-electric light-duty truck from series production. Over the next years, Daimler subsidiary Mitsubishi Fuso Truck and Bus Corporation (MFTBC) is planning to deliver a total of 500 trucks of this generation to selected customers. The large-scale series production is planned to start in 2019. In the U.S., FUSO eCanter are already committed for delivery for the logistics company UPS and in Japan the convenience-store chain Seven-Eleven and Yamato Transport each will operate 25 eCanters in their fleets.
FUSO looks back on years of gathered experience and know-how with hybrid and electric drivetrains. Since 2005, FUSO is offering the Canter Eco-Hybrid, a truck with hybrid drive train, to customers in Europe and Asia. In 2010, at the International Motor Show Germany for commercial vehicles (IAA), FUSO presented a first prototype of the electric Canter – the start of a pre-series production for testing in 2014. The development of a new series production was fueled by the entire pool of experience and findings from numerous customer-testing with pre-production vehicles in Portugal and Germany that were carried out between 2014 and 2017.
FUSO eCanter as appealing alternative for sustainable fleets
Depending on body and field of application the eCanter has a load-bearing capacity of up to 4.5 tons. The vehicle‘s electric power train contains six high-voltage lithium-ion batteries with each 420 V and 13.8 kWh. Instead of a diesel engine, an electric drivetrain with a strong permanent-magnet-engine delivers 129 kW (180 hp) via a single-gear transmission in the rear axle. 285 newton meter of continuous output allow the 7.49-tons truck to accelerate almost like a passenger car and are available from the first second of driving. The maximum speed of the eCanter – like with any other vehicle of its weight class – is limited to 80 kilometers per hour. The batteries with a total weight of approximately 600 kilograms allow a range of over 100 kilometers and so surpass in many cases the daily distance to cover in light distribution transport.
The all-electric light-duty truck is MFTBC’s answer to the public’s need for a zero-emission, zero-noise truck for continuously increasing inner city distribution. The eCanter is not only an eco-friendly vehicle, it is also cost-efficient and economical for customers. In comparison with a conventional diesel truck, it offers savings up to 1,000 Euro per 10,000 kilometers on operating costs.
Full electrification of the entire FUSO product portfolio
At the Tokyo Motor Show at the end of October, MFTBC announced it will electrify its entire range of trucks and buses of its FUSO brand in upcoming years. With the new product brand E-FUSO, MFTBC becomes the first OEM with its own electric brand for trucks and buses. In the following years all FUSO truck and bus models will offer an additional electric variant. The timing for the launch of each model will be defined according to the required technology and feasibility.
In the electrification of its trucks and buses FUSO benefits strongly from the abundant experiences and technical resources of Daimler, which heavily invests in electric mobility. Daimler is consistently using synergies between its passenger cars and commercial vehicle divisions. The Deutsche Accumotive – also a Daimler subsidiary – provides the batteries for E-FUSO trucks. Mercedes-Benz Energy – a specialist for stationary energy storage systems – is developing opportunities for a second lifecycle of the batteries. Daimler also holds stakes in ChargePoint, the world’s largest provider of charging stations and infrastructure, as well as in StoreDot – an Israeli start-up developing a new fast-charging battery technology.
Statements from our customers:
Uwe Brinks, CEO DHL Freight:
“The usage of alternative drivetrains, as in the all-electric FUSO eCanter, plays a major role in reaching our corporate goals to reduce all logistics related emissions to zero until 2050. DHL Freight is firmly committed to playing its part in this. With the help of the eCanter we want to reduce emissions and local air pollutants of our logistics and so optimize our own CO2- footprint as well as our customers’ one.”
Ewald Kaiser, COO DB Schenker AG:
“At DB Schenker we have been working for years toward becoming the global leader in “green“ logistics for our customers. Using the new eCanter is the next logical step to further our already existing eco-friendly solutions in overland transport, so that we can reach our goal to reduce the CO2-balance of our entire logistics operations around 30 percent.”
Nicolas Rottmann, Head of Rhenus Home Delivery:
“Within Rhenus Home Delivery we follow a sustainable corporate philosophy. In addition to introducing no-paper deliveries we have been preoccupied with eco-friendly alternative drivetrains for a long time. The eCanter is now giving us an opportunity to test battery-based electric vehicles in our fleet. On account of short distances from our central warehouse in Hoppegarten to our end customers, the inner city of Berlin provides an ideal surrounding for a sustainable all-electric vehicle.”
Stefan Hohm, Corporate Director, Corporate Solutions, Research & Development Dachser SE
“The vehicles are components in our project “City Distribution” and complement our innovative and sustainable concept for delivery in cities. In each city, it is about putting together an ideal vehicle-mix and to combine the fleet with innercity micro-hubs. We have decided on the FUSO eCanter, because the vehicle is the first series-produced electric truck and so will give the entire commercial vehicle class a push. Furthermore, Daimler CharterWay has been a partner of our fleet for many years, on which we can rely in terms of city logistics in the future.”